Power supply using tube Z2C

Power supply using tube Z2C are designed specifically to provide power supply voltage to the EL-34 tube amplifier push-pull in the previous article. Power supply with Z2C tube to tube power amplifier is made with a tube rectifier Z2C.
Just as the power supply for power amplifier tubes previously, the power supply is also using a filter with 3 levels of electrolytic capacitors. The circuit power supply with tube rectifier can deliver Z2C +210 VDC output voltage.


Z2C on the rectifier tube in power supply with tube above requires a supply voltage for the filaments taken from the other side of the transformer secondary. Z2C tube power supply with a power supply that is used as a substitute DAPT power supply for power amplifier tubes with a diode